Power Control Power Control
SCT52A40STDR In Stock
120V Supply, 4A Peak, High Frequency High-Side and Low-Side Gate Driver
SCT52A40STDR
  • Product Introduction
  • Technical data
  • Parameter comparison

Product Features

FEATURES:
 
 Wide supply rail from 8V-24V
 Drives Both High-side and Low-side N-Channel MOSFET
 4A Peak Output Source and Sink Current
 Bootstrap Supply Voltage Range up to 120V
 Integrated Bootstrap Diode 
 TTL Compatible Input, -10V Input Capability
 Quiescent Current 252uA
 45ns Propagation Delay Times
 2ns Delay Matching
 7ns Rise and 4.5ns Fall Time with 1000pF Load
 15ns Input Deglitching Time
 40ns Minimum Pulse Width
 Supply Rail Under-Voltage Lockout (UVLO)
 Operation from -40°C~150ºC
 Available in SOP-8L, ESOP-8L, DFN-9L 3mm×3mm, DFN-10L 3mm×3mm and DFN-8L 4mm×4mm Package
 
DESCRIPTION:
 
The SCT52A40 is a wide supply, high frequency gate drivers including both high side and low side drivers, which are used in half-bridge, full-bridge, and buck converter to drive the discrete N-Type MOSFETs. 4A Peak Source and Sink current capability increase the power converter power efficiency. The SCT52A40 features wide input hysteresis that is compatible for TTL low voltage logic. The SCT52A40has the capability to handle negative input down to -10V, which increases the input noise immunity. The ability to withstand maximum of -18V on HS pin largely extend the SCT52A40 application flexibility to handle the switching node noise.The 40ns minimum pulse width enables the SCT52A40suitable for high frequency power converter application. The SCT52A40 is available in DFN-9L 3mm x 3mm,DFN-8L 4mm x 4mm, ESOP-8L and SOP-8L package.
 
APPLICATIONS:
 
 Battery Powered Hand Tool
 Solid-State Motor Drives
 Half-Bridge and Full-Bridge Power Converter
 Two Switch Forward Power Converters
 Active-Clamp Forward Converters

Package information

SCT52A40STDR
+ -

Parameter comparison

Add comparison
Half-Bridge Driver Gate Driver
Comparison parameters
{{ goods }}
Half-Bridge Driver Gate Driver
{{ item.attr_name }} {{ vo }}