Power Interface Power Interface
SCT41100AMNER In Stock
4.1-40V 100-mΩ Single-Channel Smart High-Side Switch
SCT41100AMNER
  • Product Introduction
  • Technical data
  • Parameter comparison

Product Features

FEATURES:
  • Single -Channel 75-mΩ Smart High-Side Switch With Full Diagnostics 
  • Open-Drain Digital Output
  • Wide Operating Voltage: 4.1 V to 40 V
  • Adjustable current limit: ±30% when > 250mA, ±15% when > 500mA
  • Protection:
    • Short-to-GND Protection by Current Limit (Internal or External)  
    • Thermal Shutdown With Thermal Swing 
    • Inductive Load Negative Voltage Clamp with Optimized Slew Rate
    • Loss-of-GND and Loss-of-Battery Protection
  • Diagnostic:
    • Overcurrent and Short-to-Ground Detection
    • Open Load / Short to Battery Detection During On and Off State
    • Global Fault Report for Fast Hardware Interrupt
  • Available in an ETSSOP-14 Package
 
DESCRIPTION:

The SCT41100A device is fully protected single-channel smart high-side switch with integrated 75-mΩ NMOS power FETs.The device implements the digital fault report with an open-drain structure.
The SCT41100A provides current limit, thermal shutdown protection. Full diagnostics enable intelligent control of the load. The device is available in a 14-pin ETSSOP-14 package.

 
APPLICATIONS:
  • High-Side Relay Drivers
  • Power Switch for Sub-Module Power Supply
  • Low Wattage Lamp Power Switch
  • General Resistive, Inductive, and Capacitive Loads

Package information

SCT41100AMNER
+ -

Technical data

Title Time Download
SCT41100 Datasheet Rev 0.82 2024-12-23 Download

Parameter comparison

Add comparison
Smart Switch Power Switch
Comparison parameters
{{ goods }}
Smart Switch Power Switch
{{ item.attr_name }} {{ vo }}