Products
0
Power Switch
Power Switch
SCT41100BMNER
In Stock
4.1-40V 100-mΩ Single-Channel Smart High-Side Switch
Download datasheet
Add to Cart
Collect
- Product Introduction
- Technical data
- Parameter comparison
Product Features
FEATURES：
- Single -Channel 75-mΩ Smart High-Side Switch With Full Diagnostics
- Current Sense Analog Output
- Wide Operating Voltage: 4.1 V to 40 V
- High accurate current sense: ±15% @ 500mA, ±30% @ 50mA
- Adjustable current limit: ±30% when > 250mA, ±15% when > 500mA
- Protection:
- Short-to-GND Protection by Current Limit (Internal or External)
- Thermal Shutdown With Thermal Swing Inductive Load Negative Voltage Clamp with Optimized Slew Rate
- Loss-of-GND and Loss-of-Battery Protection
- Diagnostic:
- Overcurrent and Short-to-Ground Detection
- Open Load / Short to Battery Detection During On and Off State
- Global Fault Report for Fast Hardware Interrupt
- Available in an ETSSOP-14 Package
DESCRIPTION：
The SCT41100B device is fully protected single-channel smart high-side switch with integrated 75-mΩ NMOS power FETs.The device achieves high-precision current detection, making diagnosis more accurate.
The SCT41100B provides current limit, thermal shutdown protection. Full diagnostics enable intelligent control of the load. The device is available in a 14-pin ETSOP-14 package.
The SCT41100B provides current limit, thermal shutdown protection. Full diagnostics enable intelligent control of the load. The device is available in a 14-pin ETSOP-14 package.
APPLICATIONS：
- High-Side Relay Drivers
- Power Switch for Sub-Module Power Supply
- Low Wattage Lamp Power Switch
- General Resistive, Inductive, and Capacitive Loads
Package information
Technical data
| Title | Time | Download |
|---|---|---|
| SCT41100 Datasheet Rev 0.82 | 2024-12-23 |
 Download
|
Parameter comparison
Add comparison
Smart Switch Power Switch
| Comparison parameters |
{{ goods }}
|
Smart Switch Power Switch
|
|---|---|---|
| {{ item.attr_name }} | {{ vo }} |
