Power Module Power Module

10V DC-DC Power Module

10V DC-DC Power Module
SCT2233MLUAR In Stock
8.5V Vin, 2A Synchronous Step-down PPD ModuleTM with integrated inductor
SCT2233MLUAR
  • Product Introduction
  • Technical data
  • Parameter comparison

Product Features

FEATURES:
 
  • Available in a 7L ECLGA (2.5mm×1.7mm)Package
  • Wide Input Voltage: 4.2V-8.5V
  • 2A Continuous Output Current with Integrated 50mΩ /24mΩ FETs
  • Wide Output Voltage Range:0.8V-7V
  • Quiescent Current 205uA
  • Cycle-by-Cycle Current Limiting
  • Internal 3ms Soft-Start Limits the inrush current
  • Fixed 1.2MHz Switching Frequency
  • Input Under-Voltage Lockout
  • Power save mode at light load
  • Over-Temperature Protection
  • Support PCB double-sided welding
 
DESCRIPTION:

The SCT2233M is a fully integrated high efficiency synchronous step-down DCDC converter module capable of delivering 2A current. The devices operate over a wide input voltage range from 4.2V to 8.5V and  fully integrate high-side power MOSFETs and synchronous MOSFETs with very low Rdson to minimize the conduction loss.With 1.2MHz switching frequency, low output voltage ripple, small capacitor size are achieved. SCT2233M
adopts adaptive constant ON-time control architecture to achieve fast load transient responses for step-down applications. The SCT2233M operates in power saving mode, which maintains high efficiency during light load operation.It includes full protection features, such as over current protection, output under-voltage protection, input under-voltage lockout, and thermal shutdown.The SCT2233M requires a minimal number of 
external components and is available in a spacesaving 7L ECLGA (2.5mm×1.7mm) package.
 
APPLICATIONS:
 
  • Flat Panel Digital TV and Monitors
  • Surveillance
  • Set Top Boxes
  • Networking Systems
  • Consumer Electronics
  • General Purpose

Package information

SCT2233MLUAR
+ -

Parameter comparison

Add comparison
10V DC-DC Power Module Power Module
Comparison parameters
{{ goods }}
10V DC-DC Power Module Power Module
{{ item.attr_name }} {{ vo }}