Products
0
PWM Controller
PWM Controller
SCT81570QQLAR
Restocking
Wide Vin 60V Non-synchronous Boost/Flyback/SEPIC Converter
Download datasheet
Add to Cart
Collect
- Product Introduction
- Technical data
- Parameter comparison
Product Features
FEATURES:
•Low Shutdown Current: 2μA
•Low Quiescent Operating Current: 490μA
•+/- 1.5% Feedback Reference Voltage
•High Efficiency LS MOSFET with 77mΩ RDS(ON)
•Adjustable Switching Frequency: 100KHz to 2.2MHz
•Selectable Frequency Dither for EMI Mitigation
•External Frequency Synchronic
•External Compensation
•Pulse Skipping Mode
•Adjustable Soft-start Time
•Power Good Indicator
•Integrated Protection Feature
-Constant Peak-Current Protection Threshold Over Input Voltage
-Output Overvoltage Protection
-Adjustable Under-voltage Lockout
-Selectable Hiccup Over Load Protection
-Thermal Shutdown Protection:175°C
•TQFN-16L(3mm*3mm) Package
DESCRIPTION:
APPLICATIONS:
•Qualified for Automotive Applications
•AEC-Q100 Qualified with the Following Results:
- Device Temperature Grade 0: -40°C to 150°C
Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C3B
•Wide Input Voltage Range: 3.1V-55V•Low Shutdown Current: 2μA
•Low Quiescent Operating Current: 490μA
•+/- 1.5% Feedback Reference Voltage
•High Efficiency LS MOSFET with 77mΩ RDS(ON)
•Adjustable Switching Frequency: 100KHz to 2.2MHz
•Selectable Frequency Dither for EMI Mitigation
•External Frequency Synchronic
•External Compensation
•Pulse Skipping Mode
•Adjustable Soft-start Time
•Power Good Indicator
•Integrated Protection Feature
-Constant Peak-Current Protection Threshold Over Input Voltage
-Output Overvoltage Protection
-Adjustable Under-voltage Lockout
-Selectable Hiccup Over Load Protection
-Thermal Shutdown Protection:175°C
•TQFN-16L(3mm*3mm) Package
DESCRIPTION:
The SCT81570Q device is a wide input, non-synchronous boost converter with an integrated 60V, 6A power switch. The device can be used in Boost, SEPIC and Flyback converters. The switching frequency of the SCT81570Q device can be adjusted to any value between 100kHz and 2.2MHz by using a single external resistor or by synchronizing it to an external clock. Current mode control provides superior bandwidth and transient response in addition to cycle-by-cycle current limiting. Current limit is constant over input voltage. The SCT81570Q is an Electromagnetic Interference (EMI) friendly controller with implementing optimized design for EMI reduction. The SCT81570Q features selectable Frequency Spread Spectrum (FSS) with ±6% jittering span of the switching frequency and modulation rate 1/512 of switching frequency to reduce the conducted EMI. The SCT81570Q device has built-in protection features such as thermal shutdown, short-circuit protection and overvoltage protection. Power saving shutdown mode reduces the total supply current to 2μA. The device is available in a TQFN-16L(3mm*3mm) Package.
APPLICATIONS:
•Multi-output Flyback
•LED Bias Supply
•Portable Speaker Supply
•Battery Powered Boost/Flyback/SEPIC application
Package information
Technical data
| Title | Time | Download |
|---|---|---|
| SCT81570Q Datasheet Rev 1.1 | 2026-02-04 |
 Download
|
Parameter comparison
Add comparison
Boost Controller PWM Controller
| Comparison parameters |
{{ goods }}
|
Boost Controller PWM Controller
|
|---|---|---|
| {{ item.attr_name }} | {{ vo }} |
