Products
0
Power Switch
Power Switch
SCT41080AMNER
In Stock
4.1-40V 75-mΩ Single-Channel Smart High-Side Switch
Download datasheet
Add to Cart
Collect
- Product Introduction
- Technical data
- Parameter comparison
Product Features
FEATURES：
• Single -Channel 75-mΩ Smart High-Side SwitchWith Full Diagnostics
▪ A Version: Open-Drain Digital Output
▪ B Version: Current Sense Analog Output
• Wide Operating Voltage: 4.1 V to 40 V• High accurate current sense: ±15% @ 500mA, ±30% @ 50mA with B Version
• Adjustable current limit: ±30% when > 250mA, ±15% when > 500mA
• Protection:
▪ Short-to-GND Protection by Current Limit (Internal or External)
▪ Thermal Shutdown With Thermal Swing
▪ Inductive Load Negative Voltage Clamp with Optimized Slew Rate
▪ Loss-of-GND and Loss-of-Battery Protection
• Diagnostic:
▪ Overcurrent and Short-to-Ground Detection
▪ Open Load / Short to Battery DetectionDuring On and Off State
▪ Global Fault Report for Fast Hardware Interrupt
• Available in an ETSSOP-14 PackageDESCRIPTION：
The SCT41080 device is fully protected single-channel smart high-side switch with integrated 75-mΩ NMOS power FETs. For version A, the device implements the digital fault report with an open-drain structure. For version B, the device achieves high-precision current detection, making diagnosis more accurate. The SCT41080 provides current limit, thermal shutdown protection. Full diagnostics and highaccuracy current sense enable intelligent control of the load. The device is available in a 14-pin ETSSOP-14 package.
APPLICATIONS：
• High-Side Relay Drivers
• Power Switch for Sub-Module Power Supply
• Low Wattage Lamp Power Switch
• General Resistive, Inductive, and Capacitive Loads
Package information
Technical data
| Title | Time | Download |
|---|---|---|
| SCT41080 Datasheet Rev 0.83 | 2026-06-05 |
 Download
|
Parameter comparison
Add comparison
Smart Switch Power Switch
| Comparison parameters |
{{ goods }}
|
Smart Switch Power Switch
|
|---|---|---|
| {{ item.attr_name }} | {{ vo }} |
