Products
0
PWM Controller
PWM Controller
SCT81623DPAR
In Stock
Wide Vin 60V Non-synchronous Boost/Flyback/SEPIC Controller
Download datasheet
Add to Cart
Collect
- Product Introduction
- Technical data
- Parameter comparison
Product Features
FEATURES：
•Wide Input Voltage Range: 3.1V-60V
•Low Shutdown Current: 3.6μA
•Low Quiescent Operating Current: 540μA
•±1% Feedback Reference Voltage
•Adjustable Switching Frequency: 100kHz to 2.2MHz
•Integrated Frequency Dither for EMI Mitigation
•External Frequency Synchronic
•External Compensation
•Pulse Skipping Mode
•Supports additional Slope Compensation
•Adjustable Soft-start Time
•Power Good Indicator
•Integrated Protection Feature
-Constant Peak-Current Protection Threshold Over Input Voltage
-Output Overvoltage Protection
-Adjustable Under-voltage Lockout
-Hiccup Overload Protection
-Thermal Shutdown Protection:165°C
•TQFN-12L(2mm*3mm)
DESCRIPTION：
The SCT81623 device is a wide input, non-synchronous boost controller. The device can be used in Boost, SEPIC and Flyback converters.
The switching frequency of the SCT81623 device can be adjusted to any value between 100kHz and 2.2MHz by using a single external resistor or by synchronizing it to an external clock. Current mode control provides superior bandwidth and transient response in addition to cycle-by-cycle current limiting. Current limit is adjustable through an external resistor.
The SCT81623 is an Electromagnetic Interference (EMI) friendly controller with implementing optimized design for EMI reduction. The SCT81623 features Frequency Spread Spectrum (FSS) with ±6% jittering span of the switching frequency and modulation rate 1/512 of switching frequency to reduce the conducted EMI.
The SCT81623 device has built-in protection features such as thermal shutdown, short-circuit protection and overvoltage protection. Power-saving shutdown mode reduces the total supply current to 3.6μA. Integrated current slope compensation simplifies the design and, if needed for specific applications, can be increased using a single resistor.
The device is available in a TQFN-12L(2mm*3mm) Package.
The switching frequency of the SCT81623 device can be adjusted to any value between 100kHz and 2.2MHz by using a single external resistor or by synchronizing it to an external clock. Current mode control provides superior bandwidth and transient response in addition to cycle-by-cycle current limiting. Current limit is adjustable through an external resistor.
The SCT81623 is an Electromagnetic Interference (EMI) friendly controller with implementing optimized design for EMI reduction. The SCT81623 features Frequency Spread Spectrum (FSS) with ±6% jittering span of the switching frequency and modulation rate 1/512 of switching frequency to reduce the conducted EMI.
The SCT81623 device has built-in protection features such as thermal shutdown, short-circuit protection and overvoltage protection. Power-saving shutdown mode reduces the total supply current to 3.6μA. Integrated current slope compensation simplifies the design and, if needed for specific applications, can be increased using a single resistor.
The device is available in a TQFN-12L(2mm*3mm) Package.
APPLICATIONS：
•LED Bias Supply
•Portable Speaker Supply
•Battery Powered Boost/Flyback/SEPIC Application
•Automotive Start-Stop Application
•High Voltage LiDAR Power Supply
Package information
Technical data
| Title | Time | Download |
|---|---|---|
| SCT81623 Datasheet Rev 1.1 | 2026-08-06 |
 Download
|
Parameter comparison
Add comparison
Boost Controller PWM Controller
| Comparison parameters |
{{ goods }}
|
Boost Controller PWM Controller
|
|---|---|---|
| {{ item.attr_name }} | {{ vo }} |
