FEATURES：

 

 

DESCRIPTION：

 

The SCT2333F is a 3A synchronous buck converter with wide input voltage, ranging from 3.8V to 30V, which integrates a 90mΩ high-side MOSFET and a 36 mΩ low-side MOSFET. The SCT2333F, adopting the peak current mode control, supports the Forced Continuous Conduction Mode (FCCM) to achieve small output ripple at light load mode. The switching frequency can be programmed from 200kHz to 2.2MHz through external resistors to optimizes either the power efficiency or the external components’ sizes. The SCT2333F allows power conversion from high input voltage to low output voltage with a minimum 80ns on-time of high-side MOSFET. The SCT2333F is an Electromagnetic Interference (EMI) friendly buck converter with implementing optimized design for EMI reduction. The SCT2333F features Random Spread Spectrum ±6% jittering span of switching frequency to reduce the conducted EMI. The device offers programmable soft start to prevent inrush current during the startup of output voltage
ramping. The SCT2333F supports monotonic start with pre-biased output. The SCT2333F features internal loop compensation, which can provide stable output voltage and fast loop response, while reducing off chip configuration. The SCT2333F provides cycle-by-cycle current limit, hiccup mode for over current protection, thermal shutdown protection, output over-voltage protection and input voltage under-voltage protection. The device is available in an FCSOT583 package.

 

APPLICATIONS：

 

• Building automation, appliances, industrial PC

• Multifunction printers, enterprise projectors

• Portable electronics, connected peripherals

• Smart speakers, monitors

• Distributed power systems with 5V, 12V, 19V, and 24V input